Features:

Full Mandrel Bent 2.5" Piping
Stainless Steel T-Bolt Clamps
4-Ply Reinforced Silicone Couplers
Ceramic Chrome Powder Coat Finish
Short Route: Two feet shorter than stock
Lower piping flows over 20% more
Upper Piping flows over 12% more
Recirculation kit is only needed for Mini Battery UICP.

The ETS EVO Piping kit is designed to eliminate many of the unnecessary bends in the stock piping. Our complete piping kit starts off by immediately expanding into 2.5" diameter right off of the turbo elbow. This replaces the tiny 1 3/4" factory pipe and instantly frees up 15hp and greatly improves spool up. From here it follows the core support and wraps around to mate up to the intercooler. Once the air passes through the intercooler, the piping takes a short direct path around the core support, over the transmission and straight up to the throttle body. This unique routing is over two feet shorter than the stock routing which results in greatly improved spool up. With an 11% increase in cross sectional area, flow is increased as well.