"WOT SPECIAL" 65mm Throttle Bodies:
No one gives more attention to detail with throttle bodies than MIL.SPEC. All our throttle bodies are rebuilt with MIL.SPEC high pressure throttle body seals. The throttle body shafts are machined, so you'll get additional flow compared to other 65mm units. We have also machined the TB to get rid of that potentially annoying whistle. Also, before they are sent out, every TPS sensor is set to Mistubishi Factory Specs so it's truly a bolt-on unit (some people experience problems without properly calibrated TPS sensors). Finally, every MIL.SPEC 65mm TB is sent out with a new OEM gasket. CORE EXCHANGE REQUIRED. PM Aby@MIL.SPEC for questions and sales inquiries.
WHAT MAKES OUR 65mm THROTTLE BODIES DIFFERENT:
• Machined TB shafts for optimized flow
• Machined to eliminate the dreaded 65mm "whistle"
• Rebuilt with MIL.SPEC high pressure shaft seals
• TPS sensor calibrated to Factory Specs
• Includes BRAND NEW OEM gasket machined to 65mm
All work above requires a core exchange.
To get a 65mm TB &/or a ported inlet manifold before MIL.SPEC receiving your components, This requires a deposit which will be refunded in it’s entirety after receiving your parts that are deemed in fine working order & don’t posses damage or excessive corrosion. See example pictures/descriptions.
65mm TB core deposit is $300- & a Ported inlet manifold deposit is $250-. Here are some cost examples:
65mm TB w/core provided = $285 + $11 (USPS Priority) * 1.03 (paypal) = $305.00
65mm TB before receiving core = $275 + $11 (USPS Priority) + $300 (deposit) * 1.03 (paypal) = $614.00
We highly recommend you have us install / set-up a TPS on the 65mm to Mitsu specs for ease of installation. The shipment will take place after the funds have cleared.
When your deposit is refunded, you also get back the 3% for that too.