osCommerce
  Top » Catalog » Evolution VIII-IX » Fuel Injectors / Fuel Controller » MAFT.Pro My Account  |  Cart Contents  |  Checkout   
Categories
OVERSTOCK / USED (18)
Evolution VIII-IX-> (415)
  ECU Reflash! (3)
  Accesories (5)
  Body Kits/ Exterior (1)
  Boost Control (17)
  Brakes (28)
  Clutch / Drivetrain (27)
  Compressor Bypass (BOV) (10)
  Cooling-Engine (8)
  Electronics (4)
  Engine Upgrades (70)
  Exhaust /O2/Headers (13)
  Fluids (11)
  Fuel Injectors / Fuel Controller (31)
  Gauges E85 (9)
  Ignition (5)
  Intakes/ Filters (14)
  Intercoolers (FMIC) (11)
  Interior/Seats
  Map Sensors; GM, OmniPower (2)
  Prosport Gauges-> (41)
  Suspension (21)
  Tactrix / Altmaps Switching (3)
  Throttle Bodies (1)
  TTP Race Engines (7)
  Turbo Upgrades (18)
  Wheels / Tires (1)
  Wideband O2 Meters/
Datalog
 (24)
  Alky/Methanol Injection (4)
  Staged Upgrades (1)
  *NEW! USED PARTS SECTION
  Installation (16)
  Maintenance (9)
Honda Civic Hybrid HCHII (1)
Hyundai Genesis-> (1)
2008+ Evolution X-> (79)
2009 Ralliart 4b11-> (11)
Subaru WRX / STi-> (7)
'90-'99 DSM T/E/L->
Manufacturers
What's New? more
NAVTEQ DVD for 2006-2008 Honda Civic Hybrid
NAVTEQ DVD for 2006-2008 Honda Civic Hybrid
$140.00
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
MAF Translator PRO
[MAFT.Pro]
$399.00

MAF Translator Pro is a new and highly revolutionary tuning device for all cars using a Mass Airflow Sensor.

It is feature packed and highly configurable.

MAF TRANSLATOR PRO FEATURES:

Triple Threat Tuning:

Air/Fuel Computer mode:
This mode works extremely well for tuning all types of vehicles and is used to modify the airflow signal to tune the vehicle. The airflow sensor signal from the MAF or MAP sensor are tuned via the Translator Pros sophisticated 3D mapping algorithm allowing full tunability using the front panel keypad or Windows(TM) PC using the provided software. There are 12 rpm points and 3 different load tables, all adjustable in 1/2% increments. This means more precise tuning than competitive products!

MAF Translator Mode:
Lets you replace a restrictive or failing MAF system with another style or size of sensor. We have built in calibrations for popular and highly accurate GM MAF sensors up to 85mm that will now work on any car originally equipped with a MAF sensor. Reducing MAF sensor restriction by upgrading the MAF dramatically improves turbo spool time and horsepower and sensor range.

Speed Density Mode:
Is the ultimate in bolt-on tuning mods! The Translator Pro performs a true speed density calculation to determine engine airflow, allowing the user to remove the MAF sensor and use a GM 3 or our 5 bar MAP sensor. Allowing tuning by RPM and boost, the Translator Pro is pre-configured with base maps for most popular applications to get the user up and running quickly, just select the base map, injector size, and go!

Basic Adjustment Modes:
Here is a basic overview of some /of the things you can do with the Translator Pro. There are many more adjustments and options not listed here yet, watch this site for future updates that will be added soon.

Setup:
Mainscale: adjusts the entire range by the same %
V-Out1 set: Setpoint for V-Out1
V-Out2 set: Setpoint for V-Out2
Afterstart: Enrichment for the first few minutes of engine run time
Lo Load Pt: KPA for the Lo Load User tunes
Mid Load Pt: KPA for the Mid Load User tunes
Hi Load Pt: KPA for the Hi Load User tunes


Boost Control:
TPS Spool - TPS voltage to enable boost system, during Spool solenoid is on 100%
RPM Spool - RPM to enable boost system, during Spool solenoid is on 100%
TPS Start - TPS voltage above which the system controls the boost psi
PSI Start - Boost psi where the system switches from spool (100%) to DC% start
DC% Start - Solenoid DutyCycle that is used once the boost exceeded the Start PSI
PSI Set - Desired boost
PSI Aux - desired boost when the Aux Trigger input is energized
Gain - the speed that the Dutycycle will be adjusted to maintain the desired boost.


WOT AFR Tracking:
Min TPS - TPS above which the AFR tracking is enabled
Min RPM - RPM above which the AFR tracking is enabled
Min MAP - Manifold pressure above which AFR tracking is enabled
Lean Lim% - The maximum % that the system will lean out to maintain the desired A/F
Rich Lim% - The maximum % that the system will richen up to maintain the desired A/F
Gain - The speed that the system will try to maintain the desired A/F ratio
AFR 2000R ... AFR 8000R Desired A/F Ratio at each RPM from 2000 RPM to 8000

Air Temp:
Air temp correction, setting is added to the regular system tune value.
Note this adjustment is in addition to the Speed Density algorithms temperature compensation. Additional adjustment can be required to adjust for atomization characteristics of injectors, or heat-soak conditions.


Aux Triggered:
At each RPM point, the set tune percent is added to the system tune when the Aux Trigger input is energized. The desired AFR tracking value is modified as well so the AFR tracking will change by the Aux Trig setting.

Tuning modes:
RPM Table Choices for Fuel and Spark tuning:
400, 800, 1200, 1600, 2200, 2800, 3400, 4000, 4600, 5200, 5800, 6400, 7000, 7600

Spark timing Low load (idle, cruise)
Spark timing High load (high load, WOT)
Spark timing only available for certain application and additional software may be needed
Fuel Tune Low (idle)
Fuel Tune Mid (cruise)
Fuel Tune High (WOT)
Adjustable + or - 64% in % steps according to RPM table in each load point

Boost control with base boost gain TPS threshold and RPM point setting for total boost control in turbo applications. Needs new GM boost solenoid.

User tune values, load points are determined in the Setup page. These settings are blended between RPM and load points and added to the System Scale, Air Temp, and Aux Trigger settings.

Tune Response: TPS1 - Amount of enrichment that occurs on a throttle transition (tip-in)
TPS2 - Rate that the TPS enrichment is applied and removed.
TPS3 - not used
TPS4 - not used
MAP1 - Amount of enrichment that occurs on a positive MAP sensor
change tip-in
MAP2 - Rate that the MAP enrichment is applied and removed

Sensor Monitor & Datalogger: The Sensor monitor page is used to view various sensor and signal values. Each button toggles one of the 4 viewed valuse through the following list.

RPM - Engine RPM
MP - Manifold presure (KPA)
DC - Density Compensation (Speed Density Airtemp correction factor)
AFL - AirFlow, Speed Density calculated Grams/Sec
AFI - Airflow Input, If a MAF is connected.
VE - Volumetric Efficiency, from the Speed Density algorithm
FI - Frequency input value
FO - Frequency output value
UT - User Tune. Combined System Scale, AF Tune, Airtemp, and
Triggered adjustments
TPS - TPS sensor value
BD - Boost Dutycycle
MT - Manifold Temperature
O2 - Voltage reading on O2 sensor input
FE - Flow Error. If a MAF is conected, this is the % dif, MAF and Speed Density
ASC - Afterstart correction
AFR - A/F Ratio, if a wideband is connected.
CF - Wideband tracking Correction Factor
TAF - Target A/F Ratio

Available Options:
MAF Translator PRO:
For more information, please visit this products webpage.
This product was added to our catalog on Tuesday 18 October, 2005.
Reviews
Customers who bought this product also purchased
Zeitronix ZT2
Zeitronix ZT2
Shopping Cart more
0 items
Notifications more
NotificationsNotify me of updates to MAF Translator PRO
Tell A Friend
 
Tell someone you know about this product.
Reviews more
Write ReviewWrite a review on this product!
Languages
English
Currencies

Copyright © 2017 TTP Engineering
Powered by osCommerce